• MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating
  • MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating
  • MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating
  • MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating
  • MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating
MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating

MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating

Product Details:

Place of Origin: China
Brand Name: TIAN RUI
Certification: ROHS
Model Number: MZ5

Payment & Shipping Terms:

Minimum Order Quantity: 1000pcs
Price: USD0.03-0.04PCS
Packaging Details: PE bag, Bulk
Delivery Time: 5-7 work days
Payment Terms: T/T, Paypal, Mastercard, Wetern Union, Alipay, etc
Supply Ability: 1000000PCS per Month
Get Best Price Contact Now

Detail Information

Part Name: PTC Thermistor Coating: PF Resin
R Zero Rated Power: 1-1.5KΩ Over Voltage Withstanding: ≥800V
Color: Yellow Diameter(mm): 5.0max
Tolerance Of Rn: K±10%; M±20%; N±30% Max. Operating Voltage: 265V
Application: Over Current Protection Package: PE Bag
High Light:

105C Positive Coefficient Thermistor

,

265V Positive Coefficient Thermistor

Product Description

 

MZ5 105C 300R 265V Electronic Ballast Silicon Coating Positive Temperature Coefficient PTC Thermistor

 

Description 

MZ5 series PTC thermistors are used in all kinds of fluorescent lamp electronic ballasts and electronic energy-saving lamps. There is no need to change the circuit and the product is directly connected to the two ends of the resonant capacitor of the lamp tube, which can change the electronic ballast and electronic energy-saving lamp. The hard start is the preheating start, and the preheating time of the filament is 0.4~2 seconds, which can extend the life of the lamp more than 4 times.

The MZ5 series produced by Tianrui Electronics covers the entire series from 3 watts to 85 watts, and can develop special specifications of PTC thermistors according to customer requirements.

 
Symbol
 
MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating 0
 
Specifications of Appearance
 
MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating 1
Dimensions (mm) 
 

Number

Name

Technical Requirements

Leads
D
Diameter of Resistance
5.0max □ Straight
□ Axis Formed
■In-Forming
T
Thickness of Resistance
4.5max
L
Length of fuse
Min20
W
Distance between fuses
5.0±0.5
d  Diameter of fuse 0.5±0.05

 

Coating 

 

 Coating Material  Color
□ No coating
■ Coating
■ PF resin
□ Silicon
■ Yellow
□ Green

 

Electric Performance 
 
 Number  Items
Technical Requirements
 Test Conditions
3-1  Resistant for Zero
Rated Power
1-1.5KΩ  Atmosphere Temperature:25±2℃Accuracy of the Test:±0.5%
3-2
Over Voltage Withstanding
≥800V
Δ R/Rn≤20%
 

Starting Current:≥200mA, Starting Voltage:220VAC,hold on for 7s,and then change to high voltage800VAC,for 6s.the is shown as follows: Stay under the conditions of regular temperature and humidity for 4-5 hours, and then check
the Rn again.
3-3  Over Current withstanding ≥400mA
Δ R/Rn≤20%
 

Starting Current: ≥ 400mA,Voltage 220VAC, switch on the circuit for 1 minute after every 5minutes, switch-off, and repeat this operation for 20 times. Put it under the conditions of regular temperature and humidity for 4-5 hours and then check
the Rn again
3-5
Curie Temperature
75℃ Check the temperature at 2 times Rn.

 

Other Performance
 

Number

Items
 Technical
Requirements

Test Conditions
4-1  Appearance
No noticeable defect, such as, bubbles and micro holes, etc; NO visible damage that
may reduce its performance;
the symbol is clear

Visual Check
4-2  Welding
It's tinned evenly
and with smooth welds, and the tinned area
95%

Do the test according GB2423-28 of Ta, put
welding aid on the faze end and soaked it into the 230℃ tin solution with only 5mm distance to the PTC body above the solution,
and maintain for 3-5s.
4-3  Heat Resistance  Check the variation rate of resistance before and after the test
Δ R/Rn≤20%

Do the test according to GB2423-28 of Tb
stsy under the regular temperature and humidity for 4-5 hours, and then check the Rn again.Dipping terminals to a depth of 15mm in a soldering bath of 255℃± 10℃,and to the place of 6mm far from PTC
boby for 3±0.5s
4-4  Intensity at Fuse end  Check the variation rate of resistance before and after the test
Δ R/Rn≤20%

No break out

Do the test according to GB2423-29 of U
Test Ua: Fasten the body and apply a force gradually to each lead until 10N and then keep for 10sec.hold the body and apply a force to each lead until 90° slowly at 5N in the direction of lead axis and then keey for 10sec,and do this in the opposite direction repeat for other
terminal.

 

Part Numbering 
MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating 2
 
 ①MZ—PTC Thermistors
 
②Symbol for the products: 6—6mm; 8—≥8mm
 
③ Application: A—Preheating-starting ,B—Over current protection ,C—Temperature
sensor
 
④ Diameter(mm): 08D—8mm
 
⑤ Curie Temp(℃): 120C—120℃
 
⑥ Resistant for Zero Rated Power(Ω):47R—47Ω;4R7—4.7Ω
 
⑦ Tolerance of Rn: K±10%; M±20%; N±30%
 
⑧ Max. operating voltage(V):Vmax— 265V
 
Over Voltage withstanding(V):265V

  

Want to Know more details about this product
I am interested in MZ5 105C 265V Positive Coefficient Thermistor Electronic Ballast Silicon Coating could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.